測定電子工業用氣體氧中氧化亞氮，液化石油氣，二甲醚，甲縮醛，乙縮醛，乙醇，室內空氣，焦?fàn)t煤氣，煉廠氣，天然氣，變壓器油，多氯聯苯，植物油，6號溶劑殘留，裂解進樣器

測定電子工業用氣體氧中氧化亞氮
測定電子工業用氣體氧中氧化亞氮 詳細信息：

分析色譜柱1:
規格： 6m*2mm（內徑）
材質：不銹鋼管，
粒度：內裝粒度為0.18mm-0.25um
型號：Porapak Q，
應用：分析氧中氧化亞氮組分

切割色譜柱1：
規格：6m*2mm（內徑）
材質：不銹鋼管，
粒度：內裝粒度為0.18mm-0.25um
型號：Porapak Q，
應用：分析氧中氧化亞氮組分時的切割

本標準規定了電子工業用氧的技術要求，試驗方法以及包裝、標志、貯運及安全。 本標準適用于以深冷法、電解法提取的氣態或液態氧，以及經純化方法得到的氧。它們主要用于二氧化硅化學氣相淀積，用作氧化源和生產高純水的反應劑，用于等離子體蝕刻和剝離、光導纖維。 分子式：O2。 相對分子質量：31.998 8（按2005年國際相對原子質量計算）。

測定電子工業用氣體氧中氧化亞氮 測試譜圖：


Determination of Nitrous Oxide in Gas Oxygen for Electronic Industry
Determination of nitrous oxide in gaseous oxygen used in the electronics industry Details:

Analytical column 1:
Specification: 6m*2mm (inner diameter)
Material: stainless steel tube,
Particle size: the internal particle size is 0.18mm-0.25um
Model: Porapak Q,
Application: Analysis of nitrous oxide components in oxygen

Cutting column 1:
Specification: 6m*2mm (inner diameter)
Material: stainless steel tube,
Particle size: the internal particle size is 0.18mm-0.25um
Model: Porapak Q,
Application: Cutting when analyzing nitrous oxide components in oxygen

This standard specifies the technical requirements, test methods, packaging, marking, storage and transportation, and safety of oxygen in the electronics industry. This standard applies to gaseous or liquid oxygen extracted by cryogenic and electrolytic methods, and oxygen obtained by purification methods. They are mainly used for chemical vapor deposition of silicon dioxide, as an oxidation source and as a reactant for the production of high-purity water, for plasma etching and stripping, and optical fiber. Molecular formula: O2. Relative molecular mass: 31.998 8 (calculated according to the 2005 international relative atomic mass).

Determination of nitrous oxide in gaseous oxygen used in the electronics industry Test spectrum: